EPA

Two-Part, Epoxy Based Moisture Mitigation System suitable on porous, unheated concrete slabs to reduce moisture vapor emission rates from 100% RH or 25 lbs./1000 sq.ft./24 hrs to suitable levels before applying Schönox underlayments. Only one coat required to penetrate and to fully seal the substrate

Coverage: Approx. 290 sq. ft. per unit based on a one coat system

Working Time: Approx. 40 min. at 65 °F

Technical Documents

Schönox EPA MSDS
Schönox EPA TDS

EPA
EPA Rapid

EPA Rapid

Rapid Curing, Two-Part, Epoxy Based Moisture Mitigation System suitable on porous, unheated concrete slabs to reduce moisture vapor emission rates from 100% RH or 25 lbs./1000 sq.ft./24 hrs to suitable levels before applying Schönox underlayments. Only one coat required to penetrate and to fully seal the substrate.

Coverage: Approx. 300 sq.ft. per unit; the finished application must cover the substrate completely without any voids or pinholes to ensure moisture vapor suppression!

Working Time: Approx. 10min. at 65°F

Technical Documents

Schönox EPA Rapid MSDS
Schönox EPA Rapid TDS

MR 18

Rapid Drying, Ready-Mixed Moisture Mitigation System suitable on unheated cement based substrates with residual moisture up to 96% RH or 18 lbs./1000 sq.ft./24 hrs. in interior areas before applying Schönox underlayments. SCHÖNOX MR 18 can be used as a one coat system to solidify substrates such as wood, gypsum or adhesive residues building up a closed film.

Coverage:

1000 sq.ft. per unit based on a one coat system

500 sq.ft. per unit based on a two coat system

Working Time:

ready to apply 2nd coat: approx. 60 minutes

ready for foot traffic (after applying final coat): approx. 60 minutes

ready for leveling (after applying final coat): overnight

Technical Documents

Schönox MR18 MSDS
Schönox MR 18 TDS

Schonox_MR18 (1)